Safety notice: H500-series harnesses
Honeywell Fall Protection France SAS has issued a safety notice for selected H500-series harnesses due to potential incorrect assembly, which could seriously compromise fall protection performance.

H500-series harnesses with front/sternal D-ring and leg buckles — incorrect assembly
Honeywell Fall Protection France SAS is issuing this safety notice for specific Honeywell Miller branded H500-series harness models.
Please find in Table 1 below the 39 potentially affected Article Numbers that were manufactured at our Nabeul, Tunisia facility between March 1st, 2025, and June 30th, 2025.
Within the framework of internal quality standards and testing procedures, it was determined that a limited number of these units may have been assembled with incorrect webbing routing through the front/sternal D-ring and/or leg buckles, posing a serious safety risk. This deviation may severely limit or even completely disable the safety function of the harness in the event of a fall from height. In specific circumstances, the front/sternal D-ring and leg buckles may not be able to withstand the necessary load requirements. This could result in serious, potentially fatal, injuries.
Table 1
|
Article Number
|
Designation
|
|---|---|
|
1036081
|
H500 Pad QB 2D size 1
|
|
1036082
|
H500 Pad QB 2D size 2
|
|
1036083
|
H500 Pad QB 2D size 3
|
|
1036085
|
H500 Pad QB 2LO size 1
|
|
1036086
|
H500 Pad QB 2LO size 2
|
|
1036087
|
H500 Pad QB 2LO size 3
|
|
1036093
|
H500 QB size 1
|
|
1036095
|
H500 QB size 3
|
|
1036096
|
H500 MB 2D size 0
|
|
1036097
|
H500 MB 2D size 1
|
|
1036098
|
H500 MB 2D size 2
|
|
1036099
|
H500 MB 2D size 3
|
|
1036100
|
H500 QB 2D size 0
|
|
1036101
|
H500 QB 2D size 1
|
|
1036105
|
H500 QB 2LO size 0
|
|
1036106
|
H500 QB 2LO size 1
|
|
1036107
|
H500 QB 2LO size 2
|
|
1036108
|
H500 QB 2LO size 3
|
|
1036109
|
H500 QB 2LO Q-Fit size 1
|
|
1036110
|
H500 QB 2D size 2
|
|
1036111
|
H500 QB 2D size 3
|
|
1036121
|
H500 QB 2LO Q-Fit size 2
|
|
1036122
|
H500 QB 2LO Q-Fit size 3
|
|
1036123
|
H500 QB 2LO Ylow HV size 1
|
|
1036124
|
H500 QB 2LO Ylow HV size 2
|
|
1036125
|
H500 QB 2LO Ylow HV size 3
|
|
1036126
|
H500 QB 2D Ylow HV size 1
|
|
1036127
|
H500 QB 2D Ylow HV size 2
|
|
1036128
|
H500 QB 2D Ylow HV size 3
|
|
1036130
|
H500 QB 2LO Oran HV size 2
|
|
1036131
|
H500 QB 2LO Oran HV size 3
|
|
1036133
|
H500 QB 2D Oran HV size 2
|
|
1036134
|
H500 QB 2D Oran HV size 3
|
|
1036591
|
EDGE TESTED ROOFING KIT – H500
|
|
1036592
|
EDGE TESTED MAINTENANCE PSS KIT – H500
|
|
1036595
|
SCAFFOLDING PSS KIT – H500
|
|
1036597
|
SCAFFOLDING TURBOLITE PSS KIT – H500
|
|
1036598
|
H500 IC6 COMFORT HARNESS KIT – SIZE 2
|
|
3007-3736-001
|
H500 Mobile Platform KIT Size 2
|
|
1036598
|
H500 IC6 COMFORT HARNESS KIT – SIZE 2
|
|
3007-3736-001
|
H500 Mobile Platform KIT Size 2
|
What to do next
Please return the defective units back to us, after which we will offer you a replacement unit free of charge. Please contact our Customer Service team for return shipping labels and instructions.
We sincerely apologise for the inconvenience this may cause and thank you for your co-operation. Rest assured that the H500-series harness models will continue to offer the highest levels of quality and reliability. We have reviewed the existing safety measures and expanded quality control as a precaution. If you have any questions or for more information, please contact our Customer Service team.

The above pictures show an illustrative example for each configuration of H500 series harnesses (padding and minor characteristics may differ, however these are not relevant for this safety notice).



