City & Guilds 2391-52 Experienced Level 3 Initial and Periodic Inspection and Testing of Electrical Installations Training

• Introduction to Electrical Inspection and Testing
An overview of the principles and objectives of inspection and testing, including the importance of verifying the safety and compliance of electrical installations.

• Electrical Safety and Safe Isolation
Understanding safe working practices, safe isolation procedures and the precautions required before carrying out inspection and testing activities.

• Requirements of BS 7671
Reviewing the relevant sections of the IET Wiring Regulations and understanding how they apply to electrical inspection, testing and certification.

• Earthing Systems and Automatic Disconnection of Supply
Understanding the characteristics of earthing arrangements, protective measures and the principles of automatic disconnection of supply to ensure electrical safety.

• Theory Principles and Expected Results
Understanding the theoretical principles that underpin inspection and testing activities, including the use of calculations and formulas to determine expected test results and verify compliance.

• Initial Verification of Electrical Installations
Learning the procedures used to verify new electrical installations before they are placed into service.

• Inspection Procedures
Understanding how to carry out visual inspections and identify defects, non-compliances and potential safety concerns within electrical installations.

• Dead Testing Procedures
Developing practical skills in continuity testing, insulation resistance testing, polarity verification and other dead tests required during inspection activities.

• Live Testing Procedures
Learning how to safely carry out live testing, including earth fault loop impedance, prospective fault current and RCD testing.

• Single and Three-Phase Inspection and Testing
Developing the knowledge and practical skills required to inspect and test both single-phase and three-phase electrical installations.

• Periodic Inspection and Condition Reporting
Understanding how to assess existing installations and complete Electrical Installation Condition Reports (EICRs) in accordance with current industry standards.

• Inspection and Testing of Older Electrical Systems
Understanding the additional considerations, requirements and challenges associated with inspecting and testing older electrical installations and applying current standards to existing systems.

• Interpretation of Test Results
Learning how to analyse inspection and test results, determine compliance and identify the need for remedial actions.

• Observations, Coding and Reporting
Learning how to record observations accurately, apply appropriate classification codes and justify findings with reference to BS 7671 during periodic inspection and testing.

• Certification and Documentation
Understanding how to complete electrical certificates, schedules and reports accurately and in accordance with regulatory requirements.

• Fault Identification and Diagnosis
Developing the ability to identify, investigate and report faults and deficiencies within electrical installations.

• Practical Inspection and Testing Exercises
Applying knowledge through practical testing activities using industry-standard inspection and testing equipment.

• Assessment Preparation
Preparing for the City & Guilds assessments through tutor guidance, practical exercises and examination preparation activities.

• Assessment
Delegates complete the City & Guilds online examination and practical assessment to demonstrate their knowledge and competence in inspection and testing of electrical installations.

Training is delivered through a combination of:

• Instructor-led teaching
• Technical presentations
• Practical inspection exercises
• Hands-on electrical testing activities
• Group discussions
• Worked examples and case studies
• Assessment preparation sessions

Delegates are encouraged to actively participate throughout the course to develop both the theoretical knowledge and practical skills required to perform electrical inspection and testing activities confidently and competently.

This course is designed for qualified electricians, electrical contractors, electrical engineers and maintenance professionals who are responsible for inspecting, testing and certifying electrical installations. It is suitable for experienced operatives wishing to carry out initial verification of new installations, periodic inspection and testing of existing installations, and the completion of Electrical Installation Condition Reports (EICRs). The qualification is ideal for those seeking to develop or formally demonstrate their competence in electrical inspection, testing and certification in accordance with BS 7671.

• Delegates should hold a Level 3 qualification in Electrical Installation or possess equivalent industry experience.
• A current understanding of the IET Wiring Regulations is strongly recommended, ideally evidenced by holding a City & Guilds 2382 qualification or equivalent.
• Delegates should have practical experience of electrical installation work and be familiar with electrical systems and safe working practices.
• This qualification is intended for experienced electrical professionals involved in the inspection, testing and certification of electrical installations.