Portacount Quantitative Face-Fit Novice Training
Carry out quantitative face fit testing accurately and in line with regulatory requirements for respiratory protective equipment (RPE). You'll learn to set up and operate TSI Portacount equipment, interpret test results, and resolve fit issues across FFP3, half-face and full-face respirators - ensuring the protection your colleagues rely on is genuine.
• Introduction to health and safety in face fit testing
The key health and safety considerations relevant to face fit testing, including course objectives and the importance of correct respiratory protection practices.
• Respiratory hazards and routes of entry
The main respiratory hazards encountered in the workplace and how contaminants can enter the body through inhalation.
• Types of respiratory protective equipment (RPE)
The different types of RPE, filter selection principles, and how material safety data sheets (MSDS) support correct equipment selection.
• Exposure limits and compliance requirements
Understanding Workplace Exposure Limits (WELs) in EH40 and how they inform respiratory protection requirements in the workplace.
• RPE selection and regulatory requirements
How to select appropriate respiratory protective equipment in line with legal requirements and risk assessment outcomes.
• Face fit testing principles and guidance
The purpose of face fit testing, relevant guidance and regulations, and the differences between quantitative and qualitative methods.
• TSI Portacount set up and operation
How to set up, configure and operate TSI Portacount equipment, including diagnostic and pre-use checks.
• Preparation for face fit testing
The steps required to prepare for testing, including ensuring correct conditions for accurate results.
• Conducting face fit testing exercises
How to carry out standard face fit testing exercises and apply them across different respirator types.
• Testing different respirator types
Practical application of quantitative fit testing for FFP3 disposable masks, half-face respirators and full-face respirators.
• Interpreting fit test results
How to interpret quantitative fit test outcomes and understand pass and fail criteria.
• Troubleshooting and corrective actions
How to identify issues affecting fit test results and apply corrective actions where poor fit is identified.
• Equipment limitations
Understanding the limitations of quantitative fit testing equipment and factors that may affect accuracy or repeatability.
• Assessment
End-of-course practical assessment using Portacount equipment, supported by a written test and question session.
How to prepare
• Participants must be clean shaven around the facial area at the time of testing
Classroom-based theory combined with practical, instructor-led exercises using TSI Portacount equipment. You will learn how to select, prepare and test a range of respiratory protective equipment (RPE) and how to interpret and respond to fit test results in line with HSE guidance.
Beginners and new entrants who require a comprehensive introduction to the theory and practical application of quantitative face fit testing.
No prerequisites required.