All courses

Abrasive Wheels Awareness Course

Abrasive wheels are among the most dangerous pieces of equipment found in the workplace; misuse or poor maintenance can cause serious injury, and the law is clear on what operators and employers must do to manage the risk. This course covers the hazards associated with abrasive wheels, legal responsibilities under the Provision and Use of Work Equipment Regulations (PUWER) and how to carry out correct inspection procedures. Completed entirely online, it is designed to complement practical training rather than replace it.

Access for Theatre Technicians Level 1

Theatre environments present unique working at height challenges from climbing rigging structures and selecting anchor points to performing rescues in confined overhead spaces with limited access. This course gives theatre technicians the knowledge and practical skills to work safely using personal suspension, fall arrest and restraint techniques, rig temporary safety systems and carry out casualty lifting and lowering using a rescue kit. On successful completion, delegates receive a certificate of competency valid for three years.

Accident Reporting Awareness Course

Accident reporting is a legal requirement under the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 (RIDDOR) - and done well, it is one of the most effective tools an organisation has for preventing the same incident from happening again. This course explains what must be reported, who is responsible for reporting it and how to fulfil those duties correctly. Completed entirely online, it supports compliance with RIDDOR and helps organisations build a culture where incidents are recorded, reviewed and learned from.

Asbestos Awareness Course

Cover the risks of asbestos exposure, recognise where asbestos-containing materials (ACMs) are likely to be found and know the correct procedures for managing and reporting suspected ACMs in the workplace. You'll learn how asbestos affects the body, what the law requires of duty holders and how to respond correctly if you encounter or suspect asbestos during your work. This course is approved by IOSH, CPD-certified and fully certified by the Independent Asbestos Training Providers (IATP), and is completed entirely online.

Banksman Essentials Awareness Course

Vehicle manoeuvres on site are among the most common causes of serious workplace accidents and a competent banksman is one of the most important controls an organisation can put in place. This IIRSM-approved course covers the duties of a banksman, standard hand signals and the Safe Site, Safe Vehicle, Safe Driver model for reducing the risks associated with large vehicle movements and reversing. Completed entirely online, it is designed to complement practical banksman training rather than replace it.

C&G 2391-52 Experienced Level 3 Initial and Periodic Inspection and Testing of Electrical Installations Training

The City & Guilds 2391-52 Level 3 Award in Initial and Periodic Inspection and Testing of Electrical Installations provides experienced electrical professionals with a detailed understanding of the theoretical principles and practical requirements involved in the inspection, testing and certification of electrical installations. Covering both initial verification and periodic inspection, the qualification develops the knowledge and skills needed to apply correct inspection and testing procedures, assess the safety and compliance of electrical installations in accordance with BS 7671, and accurately complete relevant certification.

C&G 2391-52 Level 3 Award Initial and Periodic Inspection and Testing of Electrical Installations Training

The City & Guilds 2391-52 Level 3 Award in Initial and Periodic Inspection and Testing of Electrical Installations combines initial verification and periodic inspection and testing, providing experienced electrical professionals with the knowledge and practical skills required to inspect, test and certify electrical installations. Covering the key theoretical and practical aspects of inspection and testing in accordance with BS 7671, the qualification enables delegates to assess the safety and compliance of electrical installations and gain an industry-recognised award that supports professional development within the electrical industry.

Capstan Winch User Training

A capstan winch extends the lifting and lowering capability of a climbing team, but incorrect installation, poor rope management or misjudged technique can cause rope damage, load failure or injury to personnel above and below. This course gives delegates the practical knowledge and skills to install, operate and maintain a capstan winch safely. On successful completion, delegates receive a certificate of competency.

CCNSG Leading a Team Safely (LATS) Course

The CCNSG Leading a Team Safely (LATS) course is designed for supervisors and team leaders working within the engineering construction industry. It provides delegates with the knowledge and understanding required to effectively manage health and safety within their teams, promoting safe behaviours, reducing workplace risks and supporting a positive safety culture. The course reinforces the importance of leadership in maintaining safe working environments and improving overall site safety performance.

CCNSG Safety Passport Renewal Training

The CCNSG Safety Passport Renewal course enables delegates to refresh and update their knowledge of health and safety practices within the engineering construction industry. Building on the foundations of the original CCNSG Safety Passport, the course reviews key safety principles, highlights industry developments and reinforces the behaviours required to maintain a safe and compliant working environment. Successful completion allows delegates to renew their CCNSG Safety Passport and continue working on sites where this qualification is required.

CCNSG Safety Passport Training

The CCNSG Safety Passport is one of the most widely recognised health and safety qualifications within the engineering construction industry. It provides delegates with the knowledge and awareness required to work safely on site, covering key topics such as hazard identification, risk assessment, permit-to-work systems and legal responsibilities. Suitable for operatives, contractors, supervisors and technicians, the course helps delegates understand their role in maintaining a safe workplace and supports compliance with industry health and safety requirements.

CDM Regulations Awareness Course

Construction is one of the most hazardous industries in the UK, accounting for a disproportionate number of workplace fatalities each year. This IOSH-approved, CPD-accredited course provides a practical overview of the Construction (Design and Management) Regulations (CDM), covering the roles and responsibilities of duty holders, how to plan projects and assemble pre-construction information, and what is required to maintain a safe and compliant site throughout the construction phase. Completed entirely online in around 30 minutes, it supports compliance with current CDM legislation.