Description
Fenix HM61R V3.0 is a powerful (1800 lumen) rechargeable headlamp and task light. The lamp features a pocket clip and magnetic base, and is easily removed from the headband for use as an angle torch or work light.
It features versatile spotlight, floodlight and red light modes with multiple brightness levels, and is ideal for industrial, trade, vehicle & outdoor use.
HM61R V3.0 is a comprehensive upgrade to the V2.0 model.
New features:
• Increased output from 1600 to 1800 lumens
• Battery upgraded from 3400 to 4000mAh capacity
• USB-C charging
• Dual switch operation
• New 200 lumen flood light with 3 brightness levels
• Red light upgraded from 2 brightness levels to 3, max output up from 5 to 70 lumens
• Intelligent brightness downshift sensor added to reduce output at close distance (60mm). Can be disabled if needed
Fenix HM61R V3.0 performance:
Spotlight:
6500K colour temperature.
Low: 30 lumens (73 hrs) – 24m beam
Med: 150 lumens (23 hrs) – 53m beam
High 600 lumens (5 hrs 45 min) – 107m beam
Turbo: 1800 lumens (2 hrs 42 min inc temperature and battery level step downs) – 195m beam
Floodlight:
Low: 5 lumens (300 hrs) – 5m beam
Mid: 30 lumens (57 hrs) – 10m beam
High: 200 lumens (12 hrs) – 33m beam
Red light:
Low: 3 lumens (222 hrs) – 4m beam
Med: 15 lumens (53 hrs) – 8m beam
High: 70 lumens (12 hrs) – 17m beam
Flashing: 3 lumens
Fenix tested run times at each output level are achieved by switching the light on and letting it run uninterrupted until the battery is drained as per the ANSI standard. Resetting the torch to a higher power level during operation will reduce these run times.
Fenix HM61R V3 headlamp features:
• Spotlight, floodlight and red light modes
• Direct to Red light mode (double click main switch)
• 4000 mAh 18650 battery supplied
• Dual side switches for mode and output selection
• Intelligent brightness downshift sensor
• Tilt adjustable headlamp mounting
• Detachable headlamp can be used as a torch or angle light
• Magnetic tail cap and removable pocket clip offer versatility in mounting
• Built-in memory remembers your last used brightness level in Spot and Flood modes
• Electronic lock-out mode helps prevent accidental operation
• USB-C charging and inner waterproof charge socket
• 2.5 hour re-charge from empty (charger dependent)
• Battery meter LED under the switch cover
• Industrial quality – A6061 T6 aluminium construction
• Wide comfort headband with reflective lettering for safety
• HA111 hard anodized finish
• 2m drop tested
• IP68 – Waterproof 2m for 4 hours
• 167.6g weight
