WORKER PARALYSED AFTER FALLING FROM VEHICLE BONNET
A worker fell from the bonnet of a tar laying machine after standing on it to cut the branches of overhanging trees.
Dumfries Sheriff Court heard that on 7 November 2016, the employee of M & W Tarmacadam Contractors Limited – a Kendal-based construction company specialising in laying roadways – was working at the Arkleton Estate, in Langholm Dumfriesshire.
He was standing on the bonnet of the tar laying machine to cut the branches of overhanging trees when he fell from the bonnet into the tar hopper. Darren Mundell sustained a fractured back and damaged spinal cord causing permanent paralysis from the waist down.
Failure
An investigation by the Health and Safety Executive found that M & W Tarmacadam Contractors Limited had failed to plan the task of cutting the overhanging branches and this resulted in an employee using the bonnet of the tar laying machine which was not a safe place to work.
M & W Tarmacadam Contractor Ltd of Main Street, Stavely, Kendal was fined £10,000 after pleading guilty to breaching Regulation 4 of the Work at Height Regulations 2005.
Speaking after the hearing HSE Inspector Kirstin Lynchahon said: “M & W’s failings resulted in serious and life changing injuries which could have easily been prevented had the company planned the work at height.
“Planning the branch cutting activity would have included an assessment of the risks and either avoidance of working at height using long reach tools or measures being put in place to prevent a fall.
“Work at height is the biggest single cause of fatal and serious injury in the construction industry, particularly on small projects.”
Working at Height Training & Fall Protection
No matter how big or small the job may be, working at height training and fall protection equipment is always needed to ensure the safety of the worker. Learn more about our range of courses: